Bike Requirements for all Enthusiasts and Racers:
(Students and Group 1 participants click HERE to go to Student-Group 1 Bike Prep)

• Bikes must have oil fill cap, oil drain plug and oil filter safety wired. (See Safety Wire Basics for help - now includes pictures!)
• Liquid cooled bikes must run water only or racing approved coolant only, no anti-freeze. The racing approved coolant must be approved by WERA or CCS. Motul's product MoCool is approved by both CCS and WERA. Click HERE for more information on MoCool.
  
• Remove mirrors, tape over all glass and lights AND tape over the speedometer. You do not need the speedometer on the racetrack. It is an unsafe distraction.
  
• Tires must be Sport or Race compound with good tread depth. New tires are recommended.
• NEW: Please remove all previous Tech stickers from any/all organizations BEFORE coming through Tech. If you have stickers that are not removed, you will not pass Tech and you will be asked to remove them before coming back through Tech.
  
• Side stand must be secured in the up position using safety wire or zip ties. We prefer that you remove it but it is not required. You are required to have the stand secured in the up position before going onto the racetrack. Center stands must be removed.
  

We reserve the right to turn anyone away whose bike does not meet the above requirements. It is your responsibility to have these basic requirements done. No refunds will be given.